Hopkins S.C., Senatore C., Buta F., Boutboul T., Ballarino A., Bonura M., Bovone G., Lonardo F., Borca C.N., Huthwelker T.
Ключевые слова: LTS, Nb3Sn, wires, fabrication, oxygenation treatments, precipitation methods
Ogitsu T., Nishijima G., Awaji S., Sugano M., Hopkins S.C., Kawashima S., Ballarino A., Nakamoto M., Dhakarwal M.
Ключевые слова: transverse stress, compression, loads, microstructure, FCC, colliders, LTS, Nb3Sn, wires, design parameters, critical caracteristics, mechanical effects, strain effects
Eisterer M., Hopkins S.C., Ballarino A., Baumgartner T., Bernardi J., Pfeiffer S., Stoger-Pollach M., Loffler S.
Hopkins S.C., Senatore C., Buta F., Leboeuf D., Boutboul T., Ballarino A., Bonura M., Bovone G., Bagni T., Lonardo F.
Grasso G., Tumino A., Ferdeghini C., Hopkins S.C., Putti M., Vignolo M., Bernini C., Ballarino A., Tropeano M., Bovone G., Capra M., Loria F.
Ключевые слова: MgB2, wires, ex-situ process, fabrication, precursors, nanoscaled effects, powder processing, size effect, oxygen, composition, X-ray diffraction, microstructure, susceptibility, critical temperature, critical caracteristics, Jc/B curves, magnetization, pinning centers, pinning force, experimental results
Chaud X., Hopkins S.C., Senatore C., Buta F., Bordini B., Ballarino A., Bonura M., Bovone G., Matera D.
Grasso G., Tumino A., Ferdeghini C., Hopkins S.C., Putti M., Vignolo M., Bernini C., Ballarino A., Tropeano M., Bovone G., Capra M., Loria F.
Bruzzone P., Bottura L., Hopkins S.C., Ferracin P., Bordini B., Sabbi G., Ballarino A., Pong I., Arbelaez D., Cau F., Prestemon S., Reccia L., Testoni P., Rijk G.d., Perez J.C., Ravaioli E., Sedlak K., Sarasola X., Vallone G., Araujo D.M., Solodko E., *3 Portone A.
Ключевые слова: EDIPO, upgrade, magnets dipole, LTS, Nb3Sn, Rutherford cables, RRP process, design, design parameters, coils pancake
Ferracin P., Sabbi G., Ballarino A., Pong I., Arbelaez D., Prestemon S., Velev G., Hafalia A., Marinozzi V., Hopkins S., Vallone G., Araujo D.M.
Eisterer M., Hopkins S.C., Pantsyrny V., Abdyukhanov I.M., Alekseev M., Bernardi J., Tsapleva A., Ortino M., Moros A., Stoger-Pollach M., Lukyanov P., Loffler S.
Ключевые слова: FCC, LTS, Nb3Sn, wires, microstructure, composition, distribution, gradient, experimental results
Ключевые слова: FCC, LTS, Nb3Sn, wires multifilamentary, RRP process, fabrication, heat transfer, phase formation, microstructure, X-ray diffraction, phase diagram, experimental results
Bottura L., Hopkins S.C., Lee E., Sabbi G., Ballarino A., Pong I., Prestemon S., Hafalia A., Higley H., Lin A., Naus M., Perez C.
Ключевые слова: LTS, Nb3Sn, cables, design, design parameters, measurement technique, HTS, high current processing, high field tests, facility
Grasso G., Ferdeghini C., Siri A.S., Hopkins S.C., Putti M., Vignolo M., Morawski A., Bernini C., Ballarino A., Tropeano M., Gajda D., Cetner T., Bovone G., Capra M., Loria F.
Malagoli A., Ferdeghini C., Vannozzi A., Celentano G., Hopkins S.C., Braccini V., Putti M., Ballarino A., Bellingeri E., Sylva G., Lunt A.
Ключевые слова: FeSeTe, coated conductors, substrate metallic, texture, X-ray diffraction, microstructure, composition, distribution, fabrication, experimental results
Ключевые слова: FCC, accelerator magnets, LTS, Nb3Sn, design, wires multifilamentary, grain boundaries, heat treatment, modeling, filament arrangements, composition, distribution, numerical analysis
Malagoli A., Ferdeghini C., Chiarelli S., Celentano G., Hopkins S.C., Putti M., Ballarino A., Leveratto A., Leoncino L.
Ключевые слова: HTS, Bi2212, wires multifilamentary, fabrication, mechanical treatment, measurement technique, critical caracteristics, Jc/B curves, length, homogeneity
Gomory F., Glowacki B.A., Frolek L., Hopkins S.C., MOLODYK A., Guo Y., Petrykin V., Baskys A., Mitchell-Williams T.B., Bangert U.
Glowacki B.A., Hopkins S.C., MOLODYK A., Giunchi G., Patel A., Albisetti A.F., Baskys A., Kalitka V.
Ключевые слова: levitation performance, bearing magnetic, HTS, REBCO, coated conductors, stacked blocks, MgB2, bulk, disks, design parameters, experimental results
Ключевые слова: HTS, YGdBCO, coated conductors, stacked blocks, trapped field, modeling, critical caracteristics, critical current, n-value, angular dependence, flux density
Gomory F., Glowacki B.A., Granados X., Puig T., Obradors X., Usoskin A., Hopkins S.C., Vojenciak M., Driessche I.V., Backer M., Vlad V.R., Vilardell M., Soloviov M., Calleja A., Mitchell-Williams T.B., Bussche D.R.
Ключевые слова: HTS, YBCO, coated conductors multifilamentary, fabrication, inkjet printing, ac losses
Ключевые слова: HTS, YGdBCO, coated conductors, substrates, coated conductors multifilamentary, commercialization, viewpoint
Glowacki B.A., Hopkins S.C., MOLODYK A., Giunchi G., Patel A., Albisetti A.F., Baskys A., Kalitka V.
Ключевые слова: HTS, GdBCO, coated conductors, stacked blocks, levitation performance, magnets permanent, cylinders, trapped field, MgB2, bulk, disks, bearing magnetic
Ключевые слова: HTS, stacked blocks, REBCO, coated conductors, coils pancake, cylinders, bulk, levitation performance, displacements, critical state model
Glowacki B.A., Granados X., Puig T., Obradors X., Usoskin A., Hopkins S.C., Ricart S., Falter M., Backer M., Vlad V.R., Vilardell M., Calleja A., Joseph D., Mitchell-Williams T.B.
Ключевые слова: HTS, YBCO, coated conductors, tapes multifilamentary, inkjet printing, fabrication, ac losses
Ключевые слова: HTS, coated conductors, stacked blocks, pulsed magnetization, trapped field, YBCO, bulk, comparison, temperature dependence, trapped field distribution
Glowacki B.A., Hopkins S.C., Cardwell D.A., Giunchi G., Patel A., Palka R., Albisetti A.F., Shi Y.*32
Ключевые слова: MgB2, cylinders, pulsed magnetization, HTS, bulk, REBCO, levitation performance, trapped field distribution, cycling, stiffness, experimental results
Holzapfel B., Glowacki B.A., Granados X., Hopkins S.C., Ricart S., Driessche I.V., Backer M., Feys J., Lommens P., Vilardell M., Kirchner A.
Glowacki B.A., Hopkins S.C., Falter M., Backer M., Patel A., Van Driessche I., M.Mosiadz, Juda K.L., Vandaele K., Soloducho J.
Ключевые слова: HTS, coated conductors, YBCO, IBAD process, measurement setup, critical caracteristics, critical current, angular dependence, experimental results, width
Glowacki B.A., Hopkins S.C., Shi Y., Cardwell D.A., Giunchi G., Patel A., Palka R., Figini Albisetti A.
Ключевые слова: levitation performance, bearing magnetic, design, HTS, YBCO, bulk, rotors, stators, pulsed magnetization, MgB2, cylinders, REBCO, trapped field magnets, fabrication
Holzapfel B., Schultz L., Glowacki B.A., Hopkins S.C., HaBler W., Nenkov K., Rodig C., Schubert M., Morawski A., Herrmann M., Kario A.
Ключевые слова: coated conductors, substrate Ni-W, buffer layers, inkjet printing, fabrication
Ключевые слова: presentation, HTS, YBCO, coated conductors, cap layers, inkjet printing, fabrication, microstructure
Ключевые слова: LTS, Nb3Sn, internal tin method, fabrication, wires multifilamentary, microstructure, phase formation
Majoros M., Glowacki B.A., Tan K.S.(kst26@cam.ac.uk), Hopkins S.C., Astill D.
Ключевые слова: LTS, Nb3Sn, wires multifilamentary, bronze process, fabrication, resistance, experimental results, magnetic properties
Glowacki B.A., Tan K.S.(kst26@cam.ac.uk), Hopkins S.C.
Ключевые слова: LTS, Nb3Sn, wires multifilamentary, bronze process, fabrication, resistance, heat treatment, experimental results
© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.